Ulanzi ML25 MagLock Card Holder Stand: Setup Guide

Quick answer

The Ulanzi ML25 MagLock Card Holder Stand combines a slim magnetic wallet with a phone stand. This guide walks you through attaching it securely, loading cards, and using the stand feature without damaging your device or cards.

How to set up and use the Ulanzi ML25 MagLock Card Holder Stand

1. Attach the holder to your phone: Place the ML25 against the back of your phone (or case) where the MagSafe alignment magnets are. It will snap into place automatically. Make sure the holder is centered so the stand opens evenly. Check that your phone or case has a magnetic ring; non-MagSafe cases may not hold securely.
2. Load cards into the slot: Slide up to 2-3 cards into the top slot. The spring-loaded mechanism holds them snugly. Avoid forcing more than 3 cards, as it can stretch the slot and reduce grip over time. Use the top card as your most-used one (e.g., transit card) since it is easiest to access.
3. Use the stand feature: Pull the bottom edge of the holder outward until it forms a kickstand. Angle your phone to landscape or portrait mode as needed. The stand locks into place with a slight click. Do not force the stand past its natural stop; it is designed for stable viewing angles, not full 90-degree rotation.
4. Remove the holder when needed: Grip the holder firmly and pull it away from the phone. The magnetic connection is strong but releases cleanly. Avoid twisting or prying, which could scratch the phone back. If you use wireless charging, remove the holder first; the magnetic core can interfere with charging efficiency.

Product facts

• Ulanzi ML25 MagLock Card Holder Stand: Ultra-slim 0.8 cm thickness with carbon-fiber panel and aluminum-alloy body. This keeps the holder pocket-friendly and sturdy, but the slim profile means you cannot overstuff it with cards.