What the RDP LP-E8 dummy battery replaces
The RDP LP-E8 Dummy Battery for Canon LPE8 with USB connection is a coupler-style power solution. Instead of drawing energy from a charged LP-E8 pack, it sits in the camera's battery compartment and receives power through a USB connection. That makes it useful when you want to run a compatible Canon DSLR for a long shoot from a USB power source rather than swapping batteries.
The supplied record confirms the electrical path: USB input, DC output, and a fixed cable length. It does not list specific camera models, so check your camera's battery type against the LP-E8 name before relying on this coupler.
Power specs that shape your setup
- RDP LP-E8 Dummy Battery for Canon LPE8 with USB connection: Input: AC100-240V ~50/60Hz This is the AC input range for the power adapter side of the system, so you can identify whether your wall supply falls within it.

RDP LP-E8 Dummy Battery for Canon LPE8 with USB connection - RDP LP-E8 Dummy Battery for Canon LPE8 with USB connection: Input: 5V 2-4A The USB power source needs to supply 5V at 2 to 4A. A weak USB port or a charger below that range may not support the coupler's output.
- RDP LP-E8 Dummy Battery for Canon LPE8 with USB connection: Output: DC8V 4A The coupler delivers DC8V at up to 4A to the camera. This is the voltage and current the camera side is designed to receive.
- RDP LP-E8 Dummy Battery for Canon LPE8 with USB connection: Conversion efficiency: 92% (DC-DC Efficient conversion rate) The 92% DC-DC conversion rate tells you how efficiently the coupler converts input power to the camera's required output.
- RDP LP-E8 Dummy Battery for Canon LPE8 with USB connection: USB Cable Length: 150cm A 150cm cable gives you about 1.5 meters of reach between the USB power source and the camera, which affects where you place your power bank or adapter.
A practical setup sequence
- Confirm the camera uses an LP-E8 battery: The product is named for the Canon LP-E8. Check your camera's battery compartment or manual to confirm it takes an LP-E8 pack. The supplied record does not list specific camera models, so this check is on you.
- Match your USB power source to the input range: Use a USB power source that can deliver 5V at 2 to 4A. The record lists this as the input requirement. A standard low-power USB port may not meet it.
- Place the coupler in the battery compartment: Insert the dummy battery into the camera's LP-E8 slot as you would a normal battery. The supplied information does not include installation steps, so follow the physical fit and any markings on the coupler.
- Route the cable with 150cm in mind: The fixed 150cm USB cable sets your maximum distance from the power source. Plan where your power bank or adapter sits so the cable is not strained or pulled.
- Power the camera and monitor the first run: Turn on the camera and confirm it receives power. The record does not provide operating instructions or runtime estimates, so treat the first session as a check of your specific power source and camera combination.
What the supplied information does not settle
The record does not list compatible camera models beyond the LP-E8 name, nor does it include battery life, runtime, or installation instructions. It also does not state whether the coupler works with any particular USB power bank or adapter beyond the 5V 2-4A input range. These are decision points you need to verify against your own gear.
The catalog price is USD 13.60, with a comparison price of USD 20.00. That is useful context for budgeting, but the electrical and physical fit checks above matter more than the price when you are planning a long shoot.

