Godox ML-GB Bowens Mount Adapter: Fit Small Lights to Big Modifiers

By Red Dot Photo | Published: 2026-11-04

Category: أدلة إرشادية

Learn how to mount the Godox ML100Bi or ML60IIBi to Bowens modifiers with the ML-GB adapter, plus setup steps and common mistakes to avoid.

Quick answer

Use the Godox ML-GB Bowens Mount Adapter to convert the proprietary mount of the Godox ML100Bi or ML60IIBi to the industry-standard Bowens S-Type mount. Attach the adapter to the light first, then mount your Bowens modifier, and always support the modifier’s weight independently.

Why the adapter matters for compact lights

Compact LED lights like the Godox ML100Bi and ML60IIBi are lightweight and easy to place, but their proprietary mount limits you to a small pool of accessories. The ML-GB adapter opens up the huge range of Bowens S-Type modifiers—softboxes, beauty dishes, snoots, and more—without replacing your light. This is especially useful when you need soft, controllable light from a small fixture.

However, the adapter only solves the mount compatibility. It does not change the light’s output or physical balance. A large softbox can make the setup front-heavy, so you must plan how to support the modifier.

When to use a Bowens modifier with a small LED

Bowens modifiers are generally designed for studio strobes and larger LEDs, so they can be physically bigger than your compact light. Use them when you need a specific light shape—such as a large softbox for flattering portraits or a grid for controlled spill—and you can support the weight safely. Avoid hanging a very large modifier on a small light stand without counterbalance; the leverage can tip the stand or stress the adapter.

Step-by-step setup

Attach the adapter to the light: Align the ML-GB adapter with the proprietary mount on your ML100Bi or ML60IIBi and twist or lock it securely according to the adapter’s design. Do not force it; it should seat flush without wobble. Checkpoint: give the adapter a gentle tug to confirm it is locked before proceeding.
Mount your Bowens modifier: Slide the Bowens S-Type modifier onto the adapter’s front ring and tighten the locking screw or lever. Ensure the modifier is fully seated and cannot rotate freely. Common mistake: forgetting to tighten the locking screw, which can let the modifier slip off.
Support the modifier’s weight: If the modifier is large or heavy, use a light stand with a boom or a separate support arm to hold the modifier, rather than relying solely on the light’s stand mount. Position the stand so the weight is centered over the legs. Checkpoint: gently press down on the modifier; if the stand tips or flexes, add counterweight or use a sturdier support.
Balance and aim the light: Loosen the light stand’s tilt lock, adjust the angle of the light and modifier, then retighten. Keep the center of gravity over the stand’s footprint. Common mistake: over-tightening the tilt lock can stress the adapter; tighten just enough to hold the angle.
Test for light leaks and stability: Turn on the light and check around the adapter ring for light leaks. If you see spill, ensure the modifier is seated correctly and any fabric skirts are snug. Also confirm the adapter remains cool after a few minutes of use. Checkpoint: if the adapter becomes too hot to touch, turn off the light and check that the modifier is not blocking ventilation.

Product facts

Godox ML-GB Bowens Mount Adapter: The Godox ML-GB adapter converts the proprietary Godox mount to the industry-standard Bowens S-Type mount for the ML100Bi and ML60IIBi LED lights. This lets you use a wide range of Bowens softboxes and accessories with these compact lights, expanding your lighting options without buying new lights.
Godox ML-GB Bowens Mount Adapter